Product

全部
  • 全部
  • 产品管理
Search
Penumatic Wafer Type Kinfe Gate Valve

Penumatic Wafer Type Kinfe Gate Valve

Wafer-Type Fire Fighting Handle Butterfly Valve

Wafer-Type Fire Fighting Handle Butterfly Valve

Wafer-Type Fire Fighting Handle Butterfly Valve
1.Specifications ①Nominal Working Pressure: 1.6MPa ②Test Pressure: Strength Test:2.4MPa Sealing Test: 1.76MPa ③Applicable Temperature: -10~80℃ ④Applicable Medium: Clear water, etc.
2.Materials of Valve Parts. ①Body: Ductile Iron ②Disc: Ductile Iron, Stainless Steel. ③Stem: Stainless Steel. ④Seat: PTFE, NBR ⑤Hand-wheel: High-Quality Carbon Structural Steel
MHT Slurry pump

MHT Slurry pump

Maximum working pressure: ≤ 1.6MPa Flow range: 20~700m3/h Head range: 8~80m
Liquid temperature: -20~180 ° C
IJ Chemical Process Pump

IJ Chemical Process Pump

AZ slurry pump

AZ slurry pump

The commonly used materials for overcurrent components in contact with the medium are as follows:
304,321,316L, 310Cu, 0Cr25Ni16 (duplex stainless steel), 20 # alloy, 904L, TA2 (titanium), Ti/Pd (lithium titanium), Ni (nickel) Monel alloy.
RUB corrosion resistant and wear resistant mortar pump

RUB corrosion resistant and wear resistant mortar pump

Operating temperature: -20 ° C~90 ° C
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
RSY acid and alkali resistant tank vertical pump

RSY acid and alkali resistant tank vertical pump

Liquid temperature: -15 ° C~+90 ° C
·Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RSX can idle and acid alkali resistant self-priming pump

RSX can idle and acid alkali resistant self-priming pump

Liquid temperature: -15 ℃~+90 ℃
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m
Environmental temperature: maximum+40 ℃ C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RS can idle acid alkali resistant chemical pump

RS can idle acid alkali resistant chemical pump

Liquid temperature: -15 ° C~+90 ° C
Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RMC stainless steel magnetic centrifugal pump

RMC stainless steel magnetic centrifugal pump

Maximum system pressure for conveying: 1.6MPa
Maximum temperature: 100 ° C
Maximum density: 184x10kg/m3
Maximum viscosity: 30x10-6 ㎡/s (liquid without hard particles and fibers). If the system working pressure is greater than 1.6MPa, special design can be carried out, and the maximum system working pressure can reach 15MPA.
FZX fluoroplastic self-priming pump

FZX fluoroplastic self-priming pump

Operating temperature: -20 ° C~80 ° CM
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
FSC Fluoroplastic Pump (Direct Connection)

FSC Fluoroplastic Pump (Direct Connection)

Liquid temperature: -20 ° C~+120 ° C
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 1000m
Maximum system pressure: 10 bar
< 1...345...16 >