Chemical Pumps

全部
  • 全部
  • 产品管理
Search
RUB corrosion resistant and wear resistant mortar pump

RUB corrosion resistant and wear resistant mortar pump

Operating temperature: -20 ° C~90 ° C
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
RSY acid and alkali resistant tank vertical pump

RSY acid and alkali resistant tank vertical pump

Liquid temperature: -15 ° C~+90 ° C
·Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RSX can idle and acid alkali resistant self-priming pump

RSX can idle and acid alkali resistant self-priming pump

Liquid temperature: -15 ℃~+90 ℃
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m
Environmental temperature: maximum+40 ℃ C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RS can idle acid alkali resistant chemical pump

RS can idle acid alkali resistant chemical pump

Liquid temperature: -15 ° C~+90 ° C
Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RMC stainless steel magnetic centrifugal pump

RMC stainless steel magnetic centrifugal pump

Maximum system pressure for conveying: 1.6MPa
Maximum temperature: 100 ° C
Maximum density: 184x10kg/m3
Maximum viscosity: 30x10-6 ㎡/s (liquid without hard particles and fibers). If the system working pressure is greater than 1.6MPa, special design can be carried out, and the maximum system working pressure can reach 15MPA.
FZX fluoroplastic self-priming pump

FZX fluoroplastic self-priming pump

Operating temperature: -20 ° C~80 ° CM
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
FSC Fluoroplastic Pump (Direct Connection)

FSC Fluoroplastic Pump (Direct Connection)

Liquid temperature: -20 ° C~+120 ° C
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 1000m
Maximum system pressure: 10 bar
FSC fluoroplastic pump (coupling type)

FSC fluoroplastic pump (coupling type)

Liquid temperature: -20 ° C~+120 ° C
·Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
*Highest altitude: 3000m
Maximum system pressure: 10 bar
FQB Fluoroplastic Magnetic Pump

FQB Fluoroplastic Magnetic Pump

Operating temperature: -20 ° C~120 ° C
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
< 1 >