To provide Quality Products for global customers
Pumps
Self suction head [mwc] 0-10
Maximum particle diameter [mm] 2
Inhalation and discharge outlet [in] 1
Compressed air inlet [in] 10
Maximum flow rate [m ³/h] 3.5
Maximum head [m] 70
Maximum air supply pressure [bar] 7
Maximum particle diameter [mm] 2
Inhalation and discharge outlet [in] 1
Compressed air inlet [in] 10
Maximum flow rate [m ³/h] 3.5
Maximum head [m] 70
Maximum air supply pressure [bar] 7
Main performance parameters：
Flow range:0.8-29000L/H
Maximum pressure:50MPa
Measurement accuracy:±1%
Medium viscosity:0-800mm/s
Conveying medium temperature: below 450℃
Main performance parameters：
Flow range:0.8-29000L/H
Maximum pressure:50MPa
Measurement accuracy:±1%
Medium viscosity:0-800mm/s
Conveying medium temperature: below 450℃
Main performance parameters：
Flow range:0.8-29000L/H
Maximum pressure:50MPa
Measurement accuracy:±1%
Medium viscosity:0-800mm/s
Conveying medium temperature: below 450℃
Maximum working pressure: ≤ 1.6MPa Flow range: 20~700m3/h Head range: 8~80m
Liquid temperature: -20~180 ° C
Liquid temperature: -20~180 ° C
The commonly used materials for overcurrent components in contact with the medium are as follows:
304,321,316L, 310Cu, 0Cr25Ni16 (duplex stainless steel), 20 # alloy, 904L, TA2 (titanium), Ti/Pd (lithium titanium), Ni (nickel) Monel alloy.
304,321,316L, 310Cu, 0Cr25Ni16 (duplex stainless steel), 20 # alloy, 904L, TA2 (titanium), Ti/Pd (lithium titanium), Ni (nickel) Monel alloy.
RUB corrosion resistant and wear resistant mortar pump
Operating temperature: -20 ° C~90 ° C
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
Flow rate: see pump parameters
Head: see pump parameters
Highest altitude: 3000m
RSY acid and alkali resistant tank vertical pump
Liquid temperature: -15 ° C~+90 ° C
·Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
·Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RSX can idle and acid alkali resistant self-priming pump
Liquid temperature: -15 ℃~+90 ℃
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m
Environmental temperature: maximum+40 ℃ C
Highest altitude: 3000m
Maximum system pressure: 10 bar
Flow range: see pump parameters
Maximum head: see pump parameters
Maximum medium density: 135x10kg/m
Environmental temperature: maximum+40 ℃ C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RS can idle acid alkali resistant chemical pump
Liquid temperature: -15 ° C~+90 ° C
Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
Flow range: see pump parameters
·Maximum head: see pump parameters
Maximum medium density: 135x10kg/m3
Environmental temperature: maximum+40 ° C
Highest altitude: 3000m
Maximum system pressure: 10 bar
RMC stainless steel magnetic centrifugal pump
Maximum system pressure for conveying: 1.6MPa
Maximum temperature: 100 ° C
Maximum density: 184x10kg/m3
Maximum viscosity: 30x10-6 ㎡/s (liquid without hard particles and fibers). If the system working pressure is greater than 1.6MPa, special design can be carried out, and the maximum system working pressure can reach 15MPA.
Maximum temperature: 100 ° C
Maximum density: 184x10kg/m3
Maximum viscosity: 30x10-6 ㎡/s (liquid without hard particles and fibers). If the system working pressure is greater than 1.6MPa, special design can be carried out, and the maximum system working pressure can reach 15MPA.
JUQIAO TECHO(CHANGSHA) CO LTD
1
Sunny Lee
Phone/Wechat/Whatsapp :+86 19918841746
E-mail：sunny@csjuqiao.com
Kin Yao
Phone/Wechat/Whatsapp :+86 19911349356
E-mail：kin@csjuqiao.com
